Diamond Groove Rubber Replaceable Pulley Lagging for Conveyor Drum
Replaceable pulley lagging is the most unique and reliable system for lagging all conveyor and elevator pulleys. Replaceable pulley lagging can be installed on the job, usually without removing either the belt or pulleys from the system.
Replaceable Pulley Lagging Construction:
- Rubber lagging is hot vulcanized on Q235 steel plate in our factory.
- Diamond groove, plain, ceramic surface or as your request.
- Exclusive rubber compounding provides a lagging pad with exceptional drive-pulley traction, abuse resistance and extra long service life.
DB-WK1 Bolt-on Replaceable pulley lagging
Features:
1. Prevent belt slip, wet or dry
2. Good traction
3. Easy to install and replace.
4. Wearable resistance, longer service life.
5. It can be installed on site without removing pulleys.
6. Suitable for all kinds of pulleys.
Technical Data:
1. Rubber
1.1 Material: NR
1.2 Hardness:60~65 Shore A
1.3. Abrasion Loss:≤80 mm
3
2. Steel Plate Backing Plate:
2.1. Material: Q235
2.2. Thickness:2mm
2.3. Width:136±0.3mm
3. Metal Retainer:
3.1. The retainer is pressed out of steel plate and treated with zinc.
3.2. Material is Q235A
4.Overall thickness: 12mm, 15mm, 20mm.
Selection chart: Unit: mm
| Pulley Width |
750 |
950 |
1150 |
1400 |
1600 |
1800 |
| Thickness |
| 12 |
750 |
950 |
1150 |
1400 |
750+850 |
850+950 |
| 15 |
750 |
950 |
1150 |
1400 |
750+850 |
850+950 |
| 20 |
750 |
950 |
1150 |
1400 |
750+850 |
850+950 |
Thickness of rubber sheet is chosen by customers themselves, recommended thickness is listed below:
D <800mm: 12mm
800 ≤D ≤1400mm: 15mm
D >1400mm: 20mm
DB-WK2 Bolt-on Replaceable Pulley Lagging
Features:
Bolt-on replaceable pulley lagging can be installed on a pulley without removing it from the conveyor.
Diamond Lagging Rubber Sheet and Ceramic Lagging
Conveyor drum rubber lagging Features
1) Size: 10m*2m without any splice, our mold is 10m*2m
2) Cn layer peel strength: > 12 kN/m
3) Tensile strength: > 24 MPa
4) Rubber abrasion loss: < 80mm3
Technical Data
| Rubber Tensile Strength |
> 24 MPa |
| Rubber Elongation at Break |
>880% |
| Rubber Abrasion Loss |
<80mm3 |
| Rubber Hardness |
60~65A |
| Peel Strength |
> 12 kN/m |
Our Advantage
1) 22-Year Manufacturer, rich experience ensure quality and consistency.
2) 10m*2m vulcanizing press, lagging is produced in one piece without any splice. No repeated work, no waste material
3) We have diamond mold, no need carve pattern. No labor cost or wast rubber.
4) Labor cost and waste material is much reduced, so does the price.
5) strict control in QC, advnaced facilities, mature production line
6) 9-Year exporter,ceramic rubber liner got very good feedback.Repeated orders from worldwide customers.
Factory since 1996
1) Over 22 Years experience of producing and developing, Debon Technology have become top 10 belt conveyor accessories factory in China
2) Export since 2009, export to over 45 countries, repeated orders from worldwide customers
3) We've been Alibaba 10 million e-businessman since 2013
4) Rich experience, mature production, strict QC ensure quality and consistency
Audited Supplier 
){kind=link}
){kind=link}